We usually apply industrial floor coatings to a base layer of concrete. The technology and the materials used for a project are determined by the intended use of the floor covering and the base the new floor covering must be applied to.

• Rigid, abrasion resistant (SORE "A" hardness:87), floor covering, capable of enduring very high industrial loads:
  Acid, base, oil and slip resistant, expansion jointed.

  - Air Traffic and Airport Management - Budapest
  - Malév - Ferihegy (Airport)
  - Elektrolux Lehel Hűtőgépgyár Kft. (Refrigerator factory) - Jászberény
  - IMI Iklad Gépgyár Kft. (Machinery factory) - Iklad
  - Ge, Lighting Tungsram Rt. (Light bulb factory) - Budapest
  - HÖRMANN Győr Kft. (Machine and tool production) - Győr

• In the food industry the new floor coverings not only have to meet the standards of the Hungarian Department of Public Health, but the requirements of the European Union as well.
  The floor covering must have a 2% incline, static pools of water cannot remain on the floor. Not even the water used for cleaning can flow from one room to an other. An R=20 cm holker transition is required at the meeting place of different surfaces (side wall, pillar etc.) for easier and hygienic cleaning. Expansion joints must be filled with flexible resin. The floors must be slip resistant, even when greasy, oily or wet. In areas where food contacts the resin for a prolonged time, only resins certified by OÉTI can be used. It is important to note that organic acids in the food industry are continually degrading our environment.

  - Uniliver Hungary Kft. - Veszprém
  - Pápa Meat Rt. - Pápa
  - ZWACK Unicum Rt. - Budapest
  - Gyula Meat Rt. - Gyula
  - Göteborgs FOOD Budapest Rt. - Budapest
  - Fiwi-Hűt Kft. - Tata

• Conductive (antistatic) floor coverings must be used in areas where the presence of static electricity is harmful.
  We use it in rooms where different gases, steam, fog or dust can produce a combustible atmosphere, or where the formation of these conditions must always be dealt with. Such as in production or storage facilities, laboratories, paint factories, paint warehouses. In order to prevent combustion due to electrostatic discharges, a conductive floor covering is needed. The conductive floor covering is suitable for use in electronic production plants where production must take place in an electrostaticly sterile environment, and last, but not least, hospital operating rooms.
  floor coatings provide conductivity with a resistance of 10-10 OHM regardless of the conductive properties of the base floor.

  - Elektrolux Lehel Hűtőgépgyár Kft. (Refrigerator factory) - Jászberény
  - LEAR automatic (EEDS) Hungary Kft. - Gödöllő
  - Kőbányai Könnyűfém Kft. (Light metal processing) - Budapest
  - Szívkórház (Cardilogy) - Balatonfüred
  - Videoton Informatika Kft. (Electronic production) - Székesfehérvár
  - Taurus Emergé Gumiipari Kft. (Rubber production) - Szeged
  - VILATI Kft. - Eger

• We can prepare resin covers for very oily, old concrete floors without applying a second layer to the old, oily concrete, since that layer will just separate, and cause differences in floor levels where it meets door or thresholds.

  - DUNAFERR - Dunaújváros
  - IBV Hungária Kft. - Kiskunfélegyháza
  - MAL Inotai Alumínium Kft. (Aluminum production) - Inota

• TEFCOTE surface-coating materials
  The main properties of Tefcote surface-coating materials:
  

  - Used for coating walls and ceilings,
  - Ideal for use in health and food industry,
  - Water dispersion Teflon based, environmentally friendly,
  - Contains antibacterial and antifungal additives,
  - When strengthened with fiberglass, it forms a very rigid coating,
  - Easy to clean, antigraffiti,
  - Can by applied to almost any surface, even outside facades,
  - Easy and inexpensive to apply,
  

  NEW MATERIAL AND TECHNOLOGY. Reference works:Great Briatin, USA, Near and Far eastern countries
  In Hungary: Egis Pharmaceuticals - Budapest
  National Animal Health Institute - Budapest